Asus DELUXE SERIES M3A32-MVP - Manual (Page 98)

4-26 Chapter 4: BIOS setup
Marvell 6121 Option Rom [Disabled]
This item appears when you enable Marvell 6121 SATA Controller.
Configuration options: [Enable] [Disabled]
Marvell IDE/RAID function [IDE]
This item appears when you enable Marvell 6121 Option Rom.
If you want to create a RAID 0, RAID 1, or RAID 0+1 configuration from the Serial
ATA hard disk drives, set this item to [RAID].
If you want to use the Serial ATA hard disk drives as Parallel ATA physical storage
devices, keep the default setting [IDE].
Primary Display Adapter [PCI-E]
Allows you to select which graphics controller to use as the primary boot device.
Configuration options: [PCI-E] [PCI]
4.4.6 PCI PnP
The PCI PnP menu items allow you to change the advanced settings for PCI/PnP
devices.
Take caution when changing the settings of the PCI PnP menu items. Incorrect
field values can cause the system to malfunction.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2007, American Megatrends, Inc.
Advanced PCI/PnP Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
Plug And Play O/S [No]
PCI Latency Timer [64]
Allocate IRQ to PCI VGA [Yes]
Palette Snooping [Disabled]
IRQ3 [PCI Device]
IRQ4 [PCI Device]
IRQ5 [PCI Device]
IRQ7 [PCI Device]
IRQ9 [PCI Device]
IRQ10 [PCI Device]
IRQ11 [PCI Device]
IRQ14 [PCI Device]
IRQ15 [PCI Device]
NO: lets the BIOS
configure all the
devices in the system.
YES: lets the
operating system
configure Plug and Play
(PnP) devices not
required for boot if
your system has a Plug
and Play operating
system.
BIOS SETUP UTILITY
Advanced
Plug And Play O/S [No]
When set to [No], BIOS configures all the devices in the system. When set to
[Yes] and if you install a Plug and Play operating system, the operating system
configures the Plug and Play devices not required for boot.
Configuration options: [No] [Yes]