Asus DELUXE SERIES M3A32-MVP - Manual (Page 101)

ASUS M3A32-MVP Deluxe Series 4-29
4.5.5 APM Configuration
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2007, American Megatrends, Inc.
Select Power button
functionality.
BIOS SETUP UTILITY
Power
APM Configuration
Power Button Mode [On/Off]
Restore on AC Power Loss [Power Off]
Power On By PCI devices [Disabled]
Power On By PCIE Devices [Disabled]
Power On By External Modems [Disabled]
Power On By RTC Alarm [Disabled]
Power On By PS/2 Keyboard [Disabled]
4.5.2 Repost Video on S3 Resume [No]
Determines whether to invoke VGA BIOS POST on S3/STR resume.
Configuration options: [No] [Yes]
4.5.3 ACPI 2.0 Support [Disabled]
Allows you to enable or disable the Advanced Configuration and Power Interface
(ACPI) 2.0 support. Configuration options: [Disabled] [Enabled]
4.5.4 ACPI APIC Support [Enabled]
Allows you to enable or disable the Advanced Configuration and Power Interface
(ACPI) support in the Advanced Programmable Interrupt Controller (APIC). When
set to Enabled, the ACPI APIC table pointer is included in the RSDT pointer list.
Configuration options: [Disabled] [Enabled]
Power Button Mode [On/Off]
Allows you to set the power button function.
Configuration options: [On/Off] [Suspend]
Restore On AC Power Loss [Power Off]
When set to Power Off, the system goes into off state after an AC power loss.
When set to Power On, the system goes on after an AC power loss. When set to
Last State, the system goes into either off or on state, whatever the system state
was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]