Asus DELUXE SERIES M3A32-MVP - Manual (Page 55)

ASUS M3A32-MVP Deluxe Series 2-29
3. AMD ® SB600 Southbridge Serial ATA connectors
(7-pin SATA1 [red]; SATA2 [black]; SATA3 [red]; SATA4 [black])
These connectors are for the Serial ATA signal cables for Serial ATA hard disk
and optical disk drives.
If you install SATA hard disk drives to the SATA1/2/3/4 connectors, you can
create a RAID 0, RAID 1, or RAID 0+1 configuration through the onboard
AMD ® SB600 controller.
M3A32-MVP
DELUXE
®
M3A32-MVP DELUXE IDE connector
NOTE: Orient the red markings
(usually zigzag) on the IDE
ribbon cable to PIN 1.
PRI_IDE
• These connectors are set to [IDE] by default. If you intend to create a Serial
ATA RAID set using these connectors, set the Onchip SATA Type item in
the BIOS to [RAID]. See section 4.3.6 Storage Configuration for details.
• Before creating a RAID set, refer to 5.4 RAID Configurations or the
manual bundled in the motherboard support DVD.
M3A32-MVP
DELUXE
®
M3A32-MVP DELUXE
SATA connectors
SATA1 SATA3
GND RS
AT
A_TXP1
RS
AT
A_TXN1
GND RS
AT
A_RXP1
RS
AT
A_RXN1
GND GND RS
AT
A_TXP3
RS
AT
A_TXN3
GND RS
AT
A_RXP3
RS
AT
A_RXN3
GND
GND RS
AT
A_TXP2
RS
AT
A_TXN2
GND RS
AT
A_RXP2
RS
AT
A_RXN2
GND GND RS
AT
A_TXP4
RS
AT
A_TXN4
GND RS
AT
A_RXP4
RS
AT
A_RXN4
GND
SATA2 SATA4