Asus DELUXE SERIES M3A32-MVP - Manual (Page 89)

ASUS M3A32-MVP Deluxe Series 4-17
Some of the following items appear when you set AI Overclocking to [Manual],
or [Standard]. The items vary depending on which option you select.
FSB Frequency [XXX]
Displays the frequency sent by the clock generator to the system bus and PCI
bus. Use the <+> and <-> keys to adjust the FSB frequency. You can also type
the desired FSB frequency using the numeric keypad. The values range from 200
to 600. Refer to the table below for the correct Front Side Bus and CPU External
Frequency settings.
PCIE Frequency [XXX]
Use the <+> and <-> keys to adjust the PCIE frequency. You can also type the
desired PCIE frequency using the numeric keypad. The values range from 100 to
150.
PLL1 Spread Spectrum [Disabled]
Configuration options: [Disabled] [Enabled]
PLL2 Spread Spectrum [Disabled]
Configuration options: [Disabled] [Enabled]
Processor Frequency Multiplier [Auto]
This item is not configurable.
Processor Voltage [Auto]
You can enter the desired processor voltage using the numeric keypad. The values
range from 0.8000V to 1.7125V with a 0.0125V interval.
Refer to the CPU documentation before setting the CPU Vcore voltage. Setting
a high VCore voltage may damage the CPU permanently, and setting a low
VCore voltage may make the system unstable.
CPU VDDA Voltage [Auto]
Allows you to select the CPU VDDA voltage.
Configuration options: [Auto] [2.50V] [2.6V] [2.7V] [2.8V]
CPU-NB HT Link Speed [Auto]
Allows you to set the CPU-Northbridge link speed.
Configuration options: [200 MHz] [400 MHz] [600 MHz] [800 MHz] [1 GHz] [Auto]
The configuration options may vary depending on your CPU model.