Samsung SCH-R500ZRACRI - Manual (Page 57)

Understanding Your Contacts 54
Editing an Existing Contact Entry
• 2-Sec Pause — A two-second pause stops the calling sequence for two seconds
and then automatically sends the remaining digits.
• Wait — A hard pause stops the calling sequence until further input from you.
Tip: You can enter multiple two-second pauses to extend the length of a pause. For example, two
consecutive two-second pauses cause a total pause time of four seconds.
Note: Keep in mind that pauses count as digits towards the 32-digit maximum.
Store Pauses in a New Contacts Entry
1. In standby mode, enter the number you wish to store (such as your bank’s
teleservice number).
2. Press the Options (right) soft key ( ). The following menu options
appear in the display:
• Search — Lets you find Contacts list entries by their phone numbers.
• 2-Sec Pause — Adds a two-second pause.
• Wait — Adds a hard pause (awaits input from you).
• Send Text Msg — Lets you send a text message to the entered number.
• Send PIC Msg — Lets you send a picture message to the entered number.
• Send Video Msg — Lets you send a video message to the entered number.
3. Use the navigation keys to highlight the pause option of your choice.
4. Press the key to enter the highlighted pause into your number
sequence.
5. When you’re finished entering the number and pauses, press the Save
(left) soft key ( ) to store the number in your Contacts.
Add Pauses to an Existing Contacts Entry
1. Find the desired entry in the Contacts list. (See See “Finding a Contacts
Entry” on page 50. for more information.)
2. Press the Edit (left) soft key ( ). The Edit Contact screen appears in
the display with the contact name highlighted.
3. Use the navigation keys to highlight a number stored in this contact entry.
4. Use the navigation keys to place the cursor where you want to add a pause
(usually at the right-hand end of the number).
5. Press the Options (right) soft key ( ). The following menu options
appear in the display:
• Set Speed Dial — lets you assign a Speed Dial number to this Contacts entry.