Samsung SCH-R500ZRACRI - Manual (Page 128)

125
6. Repeat steps 4 and 5 for another six sets of digits. After the second group
of six sets of digits, “Adaptation complete” plays through the speaker
and you are returned to the Adapt Digits menu.
Reset Digits
To reset digit dialing to factory default settings, do the following:
1. From the Voice Service menu, press (for Voice Settings), and
for Digit Dialing. The following options appear in the display:
• Adapt Digits
• Reset Digits
2. Use the navigation keys to highlight Reset Digits, then press the key.
The phone prompts you to confirm digit adaptation rest.
Press the OK (left) soft key ( ) to reset your digit adaptation, or press
the Back (right) soft key ( ) to cancel and retain your digit
adaptation.
3. Press the key to save and exit.
Sound
Sound lets you specify what (if any) text prompts you want your phone to read to you
through the earpiece.
1. From the Voice Service menu, press (for Voice Settings), and
for Sound. The following options appear in the display:
• Prompts — Enables or disables audio prompts.
• Digits — Enables or disables audio digit playback.
• Names — Enables or disables audio name playback.
• Name Settings — Lets you adjust the speed and volume of your phone’s audio
name playback.
2. Use the navigation keys to highlight the desired setting.
3. Press the key to accept the new setting.
Voice Launch
To set the key or action that launches VoiceSignal, do the following:
1. From the Voice Service menu, press (for Voice Settings), and
for Voice Launch. The following options appear in the display:
• Key Only — Press and hold to activate VoiceSignal for one call.
• Key / EarMic — Attach a headset to your phone. Press and hold to
activate VoiceSignal. Now, you can make and end calls using VoiceSignal by
pushing the button on the headset. Press
to release VoiceSignal.
abc def
abc
ghi
abc jkl