Voice commands, Call Page 28
Page 28
25
wrong match), you might be able to get better performance by
selecting the Sensitivity setting Reject More.
• Train Voice: Use the Train Voice menu to adapt digit dialing and
name dialing to your voice.
• Prompts: Allows you to select the voice command system
characteristics.
–
Mode: Select the voice command system mode from the following:
-Prompts - for handset to read out voice command prompts
-Readout - for handset to read out prompts, dialing digits, menus,
and TXT messages (regardless of individual settings for these
above)
-Tones Only - for handset to prompt you with a tone only
–
Audio Playback: Allows audio playback to play through the
speakerphone or through the earpiece.
–
Timeout: Allows you to set the timeout interval. If not used within 5 sec
or 10 sec Voice Command will timeout and return to the home screen.
• Call Alert: Provides audible readout of the phone number and/or
name (if in your contact list) of an incoming call.
• Key Setting: Allows you to select the method the Voice Command
menu can be accessed. Select Voice Key Only, Voice Key / Headset,
Voice Key / Flip.
Voice Commands
The following is a list of functions that you can perform using
Voice Commands speech recognition on your phone.
•
Call
Name and a Location (home, work, mobile) or the phone number.
•
Send
number or to someone in your Contacts List.
•
Goto Open any application installed on your device.
•
Check
messages, missed calls, time, signal strength, battery level, and
volume level.
•
Contacts
Contacts List.
•
Play
•
My Account: Provides information about your Verizon Wireless
account.
•
Help: Provides a helpful tutorial on how to use Voice Commands.
Call
Call Digit Dialing
Digit Dial allows you to dial any phone number by simply
speaking the digits into the phone. No training is necessary, and
Digit Dial is programmed to understand natural speech.
1.
From the home screen, press the Voice Commands key
.