Ajuste inicial: ajuste del menú system, Initial setting : system menu setting, English español – Samsung SC-DC173U-XAA User Manual
Page 30: Ajuste del reloj (clock set)

ENGLISH
ESPAÑOL
Ajuste inicial: Ajuste del menú System
Ajuste del reloj (Clock Set)
La configuración del reloj está operativa en los
Camera Mode/Player Mode/
M.Cam Mode/M.Player Mode. página 26
La fecha y hora se graba automáticamente en un disco. Antes de grabar, ajuste
la fecha y la hora.
1. Coloque el interruptor
[Mode] en [DISC] o [CARD].
(sólo SC-DC173(U)/DC175/DC575)
2. Coloque el interruptor
[Power] en
[
(Camera)] o [
(Player)].
3. Presione el botón
[MENU].
Aparece la lista del menú.
4. Mueva el
[Joystick] hacia arriba o hacia abajo para
seleccionar
5. Mueva el
[Joystick] hacia arriba o hacia abajo
para seleccionar
[Joystick].
Primero se resalta el mes.
6. Mueva el
[Joystick] hacia arriba o hacia abajo para
fijar el mes actual y presione el botón
[Joystick].
Se resalta el día.
Para ajustar el reloj, seleccione Year, Month, Day,
Hour, Min o AM/PM pulsando el botón
[Joystick]
y mueva el
[Joystick] hacia arriba o hacia abajo
para ajustar los respectivos valores.
7. Fije el mes, día, año, hora, minutos y AM/PM siguiendo
el mismo procedimiento tras ajustar el mes.
8. Presione el botón
[Joystick] tras ajustar AM/PM.
Aparece el mensaje
9. Para salir, presione el botón
[MENU].
Notas
Una vez que la batería de litio pierda su carga (después
de 6 meses aproximadamente), la fecha y hora
aparecen en pantalla como
12:00 AM JAN.01.2007
Puede fijar el año hasta 2040.
Si no está instalada la batería de litio, no se realizará
ninguna copia de seguridad de los datos de entrada.
Pantallas de este manual
En este manual se utilizan las ilustraciones de la OSD
del modelo SC-DC175. Algunas partes de la OSD
de este manual podrían diferir ligeramente de los
elementos reales de su Videocámara con DVD.
Initial Setting : System Menu Setting
Setting the Clock (Clock Set)
Clock setup works in
Camera Mode/Player Mode/M.Cam Mode/
M.Player Mode. page 26
The date/time is automatically recorded onto a disc. Before recording,
please set the date/time.
1. Set the
[Mode] switch to [DISC] or [CARD].
(SC-DC173(U)/DC175/DC575 only)
2. Set the
[Power] switch to [
(Camera)] or
[
(Player)].
3. Press the
[MENU] button.
The menu list will appear.
4. Move the
[Joystick] up or down to select
5. Move the
[Joystick] up or down to select
The month will be highlight first.
6. Move the
[Joystick] up or down to set current
month, then press the
[Joystick].
The day will be highlighted.
To adjust the clock, select the Year, Month, Day,
Hour, Min, or AM/PM by pressing the
[Joystick],
then move the
[Joystick] up or down to set
respective values.
7. You can set the day, year, hour, minute, and AM/PM
following the same procedure after setting the
month.
8. Press the
[Joystick] after setting minute.
A message
9. To exit, press the
[MENU] button.
Notes
After the Lithium Battery loses its charge (after
about 6 months), the date/time appears on the
screen as
12:00 AM JAN.01.2007.
You can set the year up to 2040.
If the Lithium Battery is not installed, data inputted
will not be backed up.
Display illustrations in this manual
OSD illustrations of SC-DC175 are used in this
manual. Some of the OSD items shown in this
manual may differ slightly from the actual items on your DVD Camcorder
30
8
Move
OK
Select
MENU
Exit
Camera Mode
►System
Clock Set
Beep Sound
Language
Demonstration
JAN 01 2007
12 : 00 AM
Complete!
4
Move
OK
Select
MENU
Exit
Camera Mode
►System
Clock Set
Beep Sound
Language
Demonstration
►On
►English
►On
5
Adjust
OK
Select
MENU
Exit
Camera Mode
►System
Clock Set
Beep Sound
Language
Demonstration
JAN 01 2007
12 : 00 AM