Samsung HMX-Q20BN-XAA - Manual (Page 19)

15
Getting Started
Inserting/Ejecting the battery and memory card
Inserting/ejecting the battery
To insert the battery
1
Slide, and then open the battery slot cover as shown in the
figure.
2
Insert the battery into the battery slot until it locks.
Make sure that the SAMSUNG logo is facing down and the
battery is placed as shown in the figure.
3
Close the battery slot cover.
•
To eject the battery
1
Slide, and then open the battery slot cover as shown in the
figure.
2
Slide the Battery release switch in the direction shown in the
figure, and then pull out the battery.
3
Close the battery slot cover.
Samsung is not responsible for problems that are caused by using unapproved batteries. If you use batteries from other manufacturers, there is a danger of
overheating, fire, or explosion.
Purchase extra batteries to allow continuous use of your camcorder. •
•
Battery release switch