Samsung NP-Q1-V000-SEA - Manual (Page 93)

93
5
Select Internet Protocol Version 4
(TCP/IPv4) from the Networking tab
and click Properties.
6
Configure the IP settings.
When using DHCP, select Obtain an
IP address automatically. To use
a static IP address, select Use the
following IP address, and set the IP
address manually.
7
When you have completed the set-
tings, click the OK button.
The network settings have been com-
pleted.
■ The LAN device driver may differ
depending on your LAN device
model.
■ To add a network component,
click Install in the screen shown
in the figure above. You can add
clients, services, and protocols.
When not using DHCP, ask your
network administrator for the IP
address.