Samsung NP-Q1-V000-SEA - Manual (Page 183)

183
Q
The Wireless LAN device is operating properly, but I cannot connect to the
Internet or to another computer.
► This is due to an incorrect configuration, or a configuration error. Check the
following:
A1 If you are using a computer-to-computer (Ad Hoc) network connection, check that
the name of the configured network (SSID) is correct.
A2 If you are using a network key (encryption key), you have to use the same network
key for an AP (Access Point) or a computer-to-computer network (Ad Hoc). The
network key of the AP is configured in the AP management program. Ask your net-
work administrator or AP manager for more detailed information.
A3 Check that the device driver is installed properly. If the driver is not properly in-
stalled, you will find a yellow exclamation mark on the network icon by clicking
Start > Control Panel > System and Maintenance > Device Manager > Network
Adapter.
Q
The signal strength is excellent, but I cannot connect to the network.
► Even if the signal strength is excellent, the network connection may not oper-
ate properly if the TCP/IP properties are not properly configured, or the net-
work key (encryption key) is incorrect.
A Check that the TCP/IP properties are configured properly. When connecting to an
AP, right-click the Network Connections ( ) icon on the taskbar and select Net-
work and Sharing Center. If you click the View Status next to a connected wire-
less network device and then click the Detail button, you can view the IP informa-
tion. If the IP is not allocated properly, the IP address will be displayed as follows
(e.g. 169.254.xxx.xxx).
If the network does not provide DHCP, you have to specify the correct IP address
by asking your network administrator.
Wireless Network (WLAN) Related