Samsung NP-Q1-V000-SEA - Manual (Page 61)

61
Method 1. Configuring with the Menu Button
1
Connect the monitor and press the Menu button on the right side to launch the
Menu program.
Viewing Through an External Monitor Only
The Menu button does not support a function to display the computer screen on an
external monitor only. You can view the computer screen through an external monitor
only by using the Intel program. ( p.62 )
Menu button
Menu Program
(LCD/CRT Item)
2
Select the LCD/CRT item from the menu and configure it according to your require-
ments.
Whenever
LCD/CRT is pressed, the mode changes between LCD > Clone > Dual
View mode in this order.
●
LCD: You can view the computer screen through the LCD only.
● Clone: When selecting this mode, you can view the same screen on both the
LCD and the external monitor.
● Dual View: When selecting this mode, you can view a screen spanning over the
LCD and the external monitor, and you can set different resolutions
for each display device.