Samsung NP-Q1-V000-SEA - Manual (Page 141)

141
3
On the screen, the password setting
buttons are described.
You can set a password by entering
numbers between 1 and 4 with the
Joystick.
Since the
u2 button is used as Delete
(BackSpace) and the u4 button is
used as Cancel (Esc), enter the pass-
word using the Joystick.
Left: 4 Right: 2
Next: 3
Up: 1
Enter a password, press < Enter>, re-
enter the password for confirmation,
and press < Enter> again.
4
When a message confirming the
password configuration appears in
the [ Setup Notice] window, press
< Enter>.
The supervisor password has been
set. The supervisor password is re-
quired to turn the computer on or to
enter System Setup.