Samsung NP-Q1-V000-SEA - Manual (Page 144)

144
1
Shutdown the system and place
the computer upside down on a flat
surface.
2
Pull the two battery latches outwards
( ), then remove the battery.
Installing/Removing the Battery
Battery
Please refer to the following instructions when running the computer on battery power without
connecting the AC power.
A Lithium-Ion smart battery is supplied with this computer.
Carefully read and follow the precautions printed on the battery before using the bat-
tery.
Precautions
Use only chargers specified in the User Guide.
Never heat the battery pack, put it near or in a fire or use at a temperature higher
than 60°C, as this may cause fire.
Never cause a short circuit between the battery pack terminals or disassemble the
battery pack.
Carefully read and follow the precautions printed on the battery and the safety in-
structions in the User Guide before using the battery.
Please refer to the system operation environment ( p.195) of this guide and operate
and store the battery at room temperature.