Samsung SCH-I910ZKAVZW - Manual (Page 142)

139
1. From the Today screen, drag and drop the Wireless
Manager widget onto the Today screen.
2. Tap the Bluetooth Settings icon ➔ Device tab.
Prepare your external Bluetooth device for communication
and detection.
3. Tap Add new device from the on screen list. Your phone will
then display a list of discovered Bluetooth devices which
have been detected within its communication range.
4. Tap to select the device you wish to pair with and tap the
right soft key function Next.
5. Enter the numeric passcode and tap the right soft key
function Next. You are then notified the pairing is in
progress.
6. Tap the left soft key function Done.
7. To give the connected device a specific name, simply tap
the device from the device list and use either your virtual
QWERTY keyboard to enter a new Display Name for the
external Bluetooth device and tap the desired services
available to that same device.
8. Tap the right soft key function Save to complete the
process.
9. Tap to return to the previous screen.
Note: Smart pairing mode allows you to easily make a connection with your
hands-free or stereo headset.
Accepting a Bond
To accept an incoming bond, follow these steps:
1. Make sure that Bluetooth is turned on and the device is
discoverable.
2. When prompted to bond with the another device, tap the
Yes soft key.
3. Enter the numeric passcode/passkey and press the Next
soft key. You are then notified the pairing is in progress.
4. Use either your virtual QWERTY keyboard or keypad to
enter a new Device Name for the external Bluetooth device
and tap the desired services available to that same device.
5. Tap the Finish soft key to complete the process.
ok