Samsung GT-P1010CWAXAR - Manual (Page 111)

Settings 107
Running Services
View and control services running on your device.
Warning!: Not all services can be stopped. Stopping services may have
undesirable consequences on the application or Android System.
1. From a Home screen, press the Menu Key ➔ Settings
➔ Applications ➔ Running services.
2. To stop a service, touch the service, then touch Stop at the
confirmation prompt.
Development
Set options for application development.
USB Debugging
When enabled, allows debugging when the device is attached to
a PC by a USB cable.
Note: This setting is used for development purposes.
1. From a Home screen, press the Menu Key ➔ Settings
➔ Applications ➔ Development.
2. Touch USB debugging to enable or disable the setting.
When enabled, a check mark appears in the check box.
Stay Awake
When enabled, the screen does not go to sleep (lock) while
connected to a PC with a USB cable. This can be useful when
using some applications because the device disconnects a Wi-Fi
connection when the screen locks.
Note: This setting is used for development purposes.
1. From a Home screen, press the Menu Key ➔ Settings
➔ Applications ➔ Development.
2. Touch Stay awake to enable or disable the setting. When
enabled, a check mark appears in the check box.
Allow Mock Locations
This setting is used by developers when developing location-
based applications.
Note: This setting is used for development purposes.
1. From a Home screen, press the Menu Key ➔ Settings
➔ Applications ➔ Development.
2. Touch Allow mock locations to enable or disable the
setting. When enabled, a check mark appears in the box.