Apple Mac Performa 640 series - Manual (Page 173)

To install Air Series from Windows:
1 In the Program Manager, open the File menu and choose Run.
2 Type A:\SETUP.
Follow the instructions you see on the screen.
3 When the installation asks you to select the Ethernet card manufacturer and type,
choose anything.
Note the name of the adapter you select (for example, 3Com is 3C5x9). The
Apple driver is not on the list, so you will need to edit the AUTOEXEC.BAT
file after completing the installation.
4 When the installation asks if you want to update the AUTOEXEC.BAT file, select YES.
5 Once the installation is complete, exit Windows.
6 Edit the AUTOEXEC.BAT file as follows. (You can use any convenient text editor, such as
EDIT in the DOS directory.)
m Comment out the line
CALL C:\NWCLIENT\STARTNET.BAT
m Change the line
C:\AIR\BIN\
to
C:\AIR\BIN\MACODI
m If you are on a NetWare local area network and are using the Novell VLM
redirector, add the line
C:\NWCLIENT\VLM
after the line
C:\AIR\BIN\TCPIP
m If you are using NETx, add the line
C:\NWCLIENT\VLM
before the line
C:\AIR\BIN\TCPIP
165 Installing Network Management Software