Maximum Merlin - Manual (Page 3)

MERLIN
OPERATION
SETTING UNITS OF MEASUREMENT
Merlin can be set to display the wind speed in miles per hour, knots, kilometers per hour
or meters per second. To change the units of measurement follow these steps:
1. Press the small push button switch on the back of the indicator.
The display will show "UN" and a number. The number indicates the units of
measurement.
UN0 = miles per hour
UN1 = meters per second
UN2 = kilometers per hour
UN3 = knots
2. Press the push button again to advance through the available units.
3. When you have the code showing for the units of measurement you want, press
the toggle switch on the side of the case to the right (auto position).
Merlin will then perform a self-test and return to normal operation.
Resetting the Peak, Average and Forecast functions individually
can be done by toggling to the function that you wish to reset. Then
hold the switch to the left for at least 6 seconds. At that point you will
see the display reset itself.
To select a function, move the switch to the right and
allow it to return to the center. This toggles Merlin to
the next function. Repeat this until you see the
function that you wish.
To auto-sequence through all of the functions, hold
the switch to the right for at least three seconds.
You will see each function light stay on and the
corresponding information displayed for
approximately four seconds. MERLIN will
then move to the next function automatically.
To return to the manual sequencing mode, move the switch
briefly to the right and then let it return to center.
With the switch in the center (resting) position, MERLIN will
display the information indicated by the illuminated function
(Present, Peak, Average, or Forecast).
To reset all the stored functions at once, select the "Present"
function by moving the switch to the right and releasing until
the "Present" light is illuminated. Then hold the switch to the
left until the display blanks out (about six seconds). The unit
will then perform a self-test and return to normal operation.
Select Units of
Measurment
Page 3
30 Barnet Boulevard
New Bedford, MA 02745
(508) 995-2200
AC ADAPTOR (NO POLARITY)
3