Campbell Scientific CVS4200 / BVS4300 Stationary Samplers User Manual

Page 79

CVS4200 / BVS4300 Stationary Samplers

Cycles Abandoned - Counter
Bottle Position - Relative position of distributor
Maintenance
-

Serial Number - Unit identification number

Analog Channels - /D output display,

Backup Battery Test - Test of onboard

Lithium battery

–

Memory Check - Test of controller

RAM/ROM locations

–

Keypad Check - Test of Touchpad

(Under Maintenance, ARROW to selection, then
display with ENTER.)

ACTIVE SETTINGS

Press the VIEW key.

Press the ACTIVE SETTINGS key.

The display will show “ACTIVE SETTINGS
‘ENTER’ to list”.

Press the ENTER key. The display will show the
START DELAY programming.

Continuously pressing the ENTER key will
display all of the active program selections and
return to the original display.

Sequence: VIEW, ACTIVE SETTINGS,
ENTER(S).

NEW ENTRIES

Press the VIEW key.

Press the NEW ENTRIES key.

If no “NEW ENTRIES” have been made, the
display will show “No New Entries View Active
Set”. If new parameters have been set, but the unit
hasn’t been RESTARTed, the display will show
“NEW ENTRIES ‘ENTER’ to list”. Press the
ENTER key. The display will show the START
DELAY programming. Continuously pressing the
ENTER key will display all of the program
selections, SUBSTITUTING new parameters where
they’ve been changed, and return to the original
display.

Sequence: VIEW, NEW ENTRIES, ENTER(S).