Campbell Scientific CVS4200 / BVS4300 Stationary Samplers - Manual (Page 48)

CVS4200 / BVS4300 Stationary Samplers
The controller has now been given a new
value for START DELAY. The new values
reside in the NEW ENTRIES area of the
controller memory. To make these changes
active, press the RESTART key; press it
again to confirm your choice. The controller
will then wait until the designated time
before starting its sampling program.
Summary of Sequence:
SET, START DELAY, ARROW(S), ENTER, #, #, #, #, ENTER,
ARROW(S), ENTER, ARROW(S), ENTER, RESTART, RESTART.
7.6.4.3 START DELAY using Pulse Input
The following sequence of entries are made
on the Touchpad to create a future starting
time for the operation of the Sampler. The
ACTIVE SETTINGS are not being altered.
1. Press the SET key.
2. Press the START DELAY key.
3. Press an ARROW key. Continue until
Pulse Input is shown on the display.
4. Press the ENTER key.
The display will show a new screen
containing the option title PULSE INPUT
on the top line and a 7 digit number with the
leftmost digit flashing as an input prompt.
To set the number of pulses required to be
input before a sample program is started, use
the ARROW keys to move the flashing
prompt until it is over the digit requiring
change.
40