beautypg.com

Samlex America MSK-10A User Manual

Page 8

background image

8 | SAMLEX AMERICA INC.

SeCtIOn 3 |

Installation



figure 3-1 Mounting & Cooling

Step 3: mark Holes

Use a pencil or pen to mark the four (4) mounting hole locations on the mounting
surface.

Step 4: Drill Holes

remove the controller and drill 4.5Mm holes in the marked locations.

Step 5: Secure Controller

Place the controller on the surface and align the mounting holes with the drilled holes
in step 4. Secure the controller in place using the mounting screws.

WiRinG

i

inFo

• A recommended connection sequence has been provided below for

maximum safety during installation.

• The controller is a common Positive ground controller.

!

cAUtion!

• Do NoT CoNNeCT loADS To THe loAD TeRmINAlS wITH SuRGe PoweR

exceeDinG 10A.

• foR mobIle APPlICATIoNS, be SuRe To SeCuRe All wIRING.

Warm Air

Cool Air

150 mm / 5.9"

150 mm / 5.9"