Matrix Orbital GTT70A - Manual (Page 40)

Command Summary 36
11.6 Set Auto
Repeat Mode Dec
Hex
ASCII 254 165
FE A5
þ ¥
Mode
Mode
Mode 2.0
Set key press repeat mode to typematic or hold. In typematic mode if a key press is held, by default the key value
is transmitted immediately, then 5 times a second after a 1 second delay. In hold mode, the key down value is
transmitted once when pressed, and then the key up value is sent when the key is released. Default is Off.
Mode Byte Desired keypad auto repeat mode, as per eKeypadRepeatMode values.
Table 28: eKeypadRepeatMode values
Value Description
0 Off
1 Hold
2 Typematic
11.7 Assign Keypad
Codes Dec
Hex
ASCII 254 213
FE D5
ю Х
Length KeyCodes
Length KeyCodes
Length KeyCodes
Assign values reported to the host when a key press is detected. Up to 25 keys may be defined.
Length Byte Length of the data to be transferred, in bytes.
KeyCodes Byte(s) A list of byte values for each key to be defined. Default values are 65 through 90.