Matrix Orbital GTT70A - Manual (Page 39)

35 Command Summary
2.11 Keypad
11.1 Clear Key
Buffer Dec
Hex
ASCII 254 69
FE 45
þ E
2.0
Clear all saved key presses from the key buffer.
11.2 Set Keypad
Transmit Mode Dec
Hex
ASCII 254 79
FE 4F
þ O
AutoTransmit
AutoTransmit
AutoTransmit 2.0
Toggle auto transmission of key values. Can be used to poll the key buffer.
AutoTransmit Byte Auto transmit mode, as per eOnOff values.
Table 27: eOnOff values
Value Description
0 Off
1 On
11.3 Set Debounce
Time Dec
Hex
ASCII 254 85
FE 55
þ U
Mode
Mode
Mode 2.0
Set the time, in milliseconds, between a key press and a key read by the display. Most switches will bounce when
pressed; the debounce time allows the switch to settle for an accurate read. Default is 64ms.
Mode Byte Debounce time in milliseconds.
11.4 Set Typematic
Interval Dec
Hex
ASCII 254 158
FE 9E
þ ž
Interval
Interval
Interval 2.0
Set the interval between reported key presses when a key is held. Typematic mode only.
Interval Short Time between key reports, in milliseconds, default is 200ms.
11.5 Set Typematic
Delay Dec
Hex
ASCII 254 159
FE 9F
þ Ÿ
Delay
Delay
Delay 2.0
Set the delay between the first key press and first typematic report when a key is held. Typematic mode only.
Delay Short Time key must be held to trigger a report, in milliseconds, default is 1000ms.