Aalborg Vortex Insertion - Manual (Page 98)

93
COMMAND
NAME
DESCRIPTION
NO.
COMMAND SYNT
A
X
COMMAND
ARGUMENT 1
ARGUMENT 2
ARGUMENT 3
ARGUMENT 4
RESPONSE
PWM DSP Settings
Sets/Reads PWM DSP related variables. Argument1 = V
:
Display/Change Meter V
o
rtex Frequency
Sour
ce Following
V
o
rtex Frequency
sour
ces are supported:
0 - Automatic 1 - Pulse Counts 2 - PWM 3 – FFT 4 - A
WD PWM
Argument1 = I: Display/Change Meter Pulse Measure Inter
val
settings. Note: Pulse Measure Inter
val has to be in
the range: 500mS MI
60000 mS.
Argument1 = F: Display/Change NR Filter Parameters: NRF Sample Number [1-32] NRF T
ime Limit
[0-32] NRF Error Limit [0.0-100.0%]
20
PW
V Read/Change Meter V
ortex Frequency Sour
ce
0 - Automatic 1 - Pulse Counts 2 - PWM 3 – FFT 4 - A
WD PWM
ce>
0-4
PWV
:
Example: PWV
:0
No Argument (Returns Current V
o
rtex
Frequency sour
ce settings)
PWV
:
Example: PWV
:0
I Pulse Measure Inter
val
in mS [500-60000]
PWI: Example: PWI:2000
No Argument (Returns Current set.)
PWI: Example: PWI:2000
D Flow NRF Damping [0-99 sec.]
in sec. [0-99]
PWD: Example: PWD:1
No Argument (Returns Current set.)
PWD: Example: PWD:1
F NRFilter Parameters: NRF Sample Numb. NRF T
ime Limit
NRF Error Limit
[1-32]
[0-32]
[0.0-100%]
Example: PWF:4,8,0.0
No Argument (Returns Current set.)
Example: PWF:4,8,0.0
W Tu
rbulence Flow
Window 0 - Disabled
[0-99]
PWW: Example: PWW:0
No Argument (Ret. Current settings)
PWW: Example: PWW:0
L Flow Meter Linearizer E - Enable D
- Disable
alue>
E or D
PWL: Example: PWL:E
No Argument (Ret. Current settings)
PWL: Example: PWL:E