Aalborg Vortex Insertion - Manual (Page 97)

92
COMMAND
NAME
DESCRIPTION
NO.
COMMAND SYNT
A
X
COMMAND
ARGUMENT 1
ARGUMENT 2
ARGUMENT 3
ARGUMENT 4
RESPONSE
Calibration Settings
Sets/Reads Calibration related variables. Argument 1 = T Hours since last time unit was calibrated. NOTE: has to be reset to zero after calibration.
19
CS
S Meter Size/Pipe ID [inches]
alue>
[inches]
CSS: Example: CSS:0.75
No Argument (Returns Current Meter Size settings)
CSS: Example: CSS:0.75
F Meter Full Scale Range in liter/min
alue>
[liter/min]
CSF: Example CSF:1000.0
No Argument (Returns Current Meter FS Range)
CSF: Example: CSF:1000.0
C Meter Calibration Factor Hz/liter/min] (for STD condi- tions)
alue>
[Hz/l/min]
CSC: Example CSC:1.0
No Argument (Returns Current Meter Calibration Factor)
CSC: Example CSC:1.0
O Meter Low and High Frequency Cut Off [Hz]
alue> (Hz)
V
alue>(Hz)
CSO:
alue>,
:
alue>
No Argument (Returns Current Cut off V
alues settings)
CSO:
alue>,
:
alue>
L Meter Low Flow Cut Off in % of full scale
alue>
(%FS)
CSL: Example: CSL:5.0
No Argument (Returns Current value)
CSL: Example: CSL:5.0
T Calibration/Mainten ance T
imer
No Argument (read timer)
CST
:
Example: CST
:1024.2
Z Set Cal. T
imer to Zero
CST
:Z