Aalborg Vortex Insertion - Manual (Page 88)

83
COMMAND
NAME
DESCRIPTION
NO.
COMMAND SYNT
A
X
COMMAND
ARGUMENT 1
ARGUMENT 2
ARGUMENT 3
ARGUMENT 4
RESPONSE
Te
mperature
Alarms**
Sets / reads the status of the temperature alarms. Note: High and Low limits have to be entered in the °C. High alarm value has to be more than Low alarm value. Alarm conditions: Temp. > High Limit = H Temp. < Low Limit = L Low < T
emp. < High = N
9
TA
H (high temp. limit)
alue>
(-20.1-260 °C)
TA
H:
alue [°C]>
L (low temp. limit)
alue>
(-20.1-260 °C)
TA
L:
alue [°C]>
A (action delay in seconds)
alue> (0-3600
sec.)
TAA:
alue [Sec]>
E (enable alarm)
TA
:E
D (disable alarm)*
TA
:D
R (read current status)
TA
R:N (no alarm)
TA
R:H (high alarm)
TA
R: L (low alarm)
S (Read current settings)
TAS:M,L,H,D,B where: M – mode (E/D) L – Low settings (°C) H – High settings (°C) D – Action Delay (sec) B – Latch mode (0-1)
B Block (Latch) mode
alue>
(0-disabled*) (1-enabl’d )
TAB:
alue> where:
V
alue = 0 – 1