MagTek IntelliStripe 320 99875168 - Manual (Page 2)

ii
Copyright
© 2000-2009
MagTek, Inc.
Printed in the United States of America
Information in this document is subject to change without notice. No part of this document may
be reproduced or transmitted in any form or by any means, electronic or mechanical, for any
purpose, without the express written permission of MagTek, Inc.
MagTek is a registered trademark of MagTek, Inc.
IntelliStripe is a registered trademark of MagTek, Inc.
REVISIONS
Rev Number Date Notes
1 15 May 00 Initial Release
2 18 Oct 00 Section 7: Transport cooling mode changed from 10 to 5 secs.
Added Appendix B, Memory Cards. The first is SLE 4442/4432
Memory Card Control.
3 13 Nov 00 Added support for SLE 4428/4418 and SLE 4428/4418 Memory
Card Controls.
4 12 Jul 01 Sec 7, Notify Indicator Change 0 to 1 Property and Notify
Indicator Change 1 to 0 Property, Values: changes to bits 1-2, 3,
and 4-31; text changed in 1-2 and 4-31.
5 23 Oct 01 Section 5. Editorial Corrections throughout. Appendix B. Added
support for the SLE4404 Memory Card and I
2
C
™ Cards families.
6 2 May 02 Section 4: Added Decode JIS Type 2 Property; Changed
Decode Status Definitions in CMD ID 81 and 82, Added JIS to
Card Encode Type in CMD 81 and 82. Appendix B: Completely
revised SLE 4404 Memory Card Control.
7 22 May 02 Section 5: Added description at the end of “Card Types”
including list of card types.
8 5 Sep 06 Removed Warranty information; added support for: saving
properties, acquiring MagnePrint, adjusting sensor timing for
eject, enabling power fail eject, controlling the buzzer, and
adjusting host communication properties
9 18 Sep 06 Added Section 10 for OTI SCI1000 Contactless Smart Card
Application
10 01 Jun 08 Included information about the Contactless Smart Cards that are
supported and Mifare commands.
11 10 Feb 09 Added description of Warm Reset command for Smart Cards.
The Warm Reset feature has existed for a long time but it had
not been documented in the manual.