Features, Hardware configuration, Accessories – MagTek Bluetooth MagneSafe V5 Swipe Reader User Manual
Page 10: Reference documents
Bluetooth MagneSafe V5 Swipe Reader
2
FEATURES
Major features of the Bluetooth Swipe Reader are as follows:
•
Powered by a rechargeable battery; recharging can be provided via a standard USB cable (for
recharging only)
•
Compatible with any device that supports Bluetooth virtual serial port profile (SPP)
•
Bi-directional card reading
•
Reads encoded data that meets ANSI/ISO/AAMVA standards and some custom formats such
as ISO track 1 format on track 2 or 3
•
Reads up to three tracks of card data
•
Red/Green/Amber LED for status
•
Non-volatile memory for property storage
•
Supplies 54 byte MagnePrint™ value
•
Contains a unique, non-changeable device serial number which allows tracking each reader
•
Encrypts all track data and the MagnePrint value
•
Provides clear text confirmation data including card holder’s name, expiration date, and a
portion of the PAN as part of the Masked Track Data
•
Mutual Authentication Mode for use with Magensa®
HARDWARE CONFIGURATION
The hardware configuration is as follows:
Part Number
Tracks
Style
Interface
Cable
21073021
1, 2, 3
BT90
Bluetooth
N/R*
* No cable is required to operate the reader but one of the
cables listed below can be used to charge the battery.
ACCESSORIES
The accessories are as follows:
Part
Number
Description
Notes
21051515 USB-A TO USB-Mini-B Gray, 750mm Cable
For battery charging Bluetooth readers
21051516 USB-A TO USB-Mini-B Gray, 1200mm Coiled Cable
For battery charging Bluetooth readers
51300010 Bluetooth USB 2.0 Adapter
For interface to PC
REFERENCE DOCUMENTS
ANS X9.24-2004 Retail Financial Services Symmetric Key Management Part 1: Using
Symmetric Techniques