Videotec MAXIMUS MHXT - Manual (Page 38)

EN - English - I
nstruc
tions manual
38
13 Technical data
If the equipment is likely to come into contact with
aggressive substances, then it is the responsibility of
the user to take suitable precautions that prevent it
from being adversely affected, thus ensuring that the
type of protection is not compromised.
Aggressive substances: Acidic liquids or gases
that may attack metals, or solvents that may affect
polymeric materials.
Suitable precautions: Regular checks as part of
routine inspections or establishing from the material’s
data sheet that it is resistant to specific chemicals.
It is the end users responsibility to ensure the
materials of construction as detailed are suitable for
the intended point of installation. If in doubt consult
the manufacturer.
13.1 MHX
13.1.1 General
AISI 316 stainless steel construction
Passivated and electropolished external surfaces
Silicone O-ring seals
13.1.2 Mechanical
2 3/4" NPT holes for cable entry
Window
- Tempered glass
- Dimensions (Ø): 75mm (3.0in)
- Thick: 12mm
Sunshield
Unit weight: 16.5kg (36.4lb)
13.1.3 Electrical
Power supply/Current consumption:
- 230Vac, 0.34A, 50/60Hz
- 120Vac, 0.5A, 50/60Hz
- 24Vac, 2.2A, 50/60Hz
- 12Vdc, 2.8A
Heating (Ton 10°C±4°C (50°F±7°F), Toff 22°C±3°C
(77°F±5°F))
- 230Vac: 60W max
- 120Vac: 40W max
- 24Vac: 30W max
- 12Vdc: 34W max
Devices to install inside the housing
- Camera equipped with lens with total power of
13W max
- Minimum distance between camera and
housing's window: 10mm (0.4in)
- Dimensions of the cameras/lenses that can be
installed: 80x82x245mm (WxHxL) max
I/O (version with wiper)
- 1 input for remote wiper activation. Clean contact
N.O.
- 1 input for status Day/Night camera
- 1 relay output for washer activation (1A
30Vac/60Vdc max)
- 1 relay output for illuminator activation (1A
30Vac/60Vdc max)