beautypg.com

2 unpacking and contents, 1 unpacking, 2 contents – Videotec MAXIMUS MHXT User Manual

Page 16: 3 safely disposing of packaging material, 4 preparatory work before installation, 1 unpacking 6.2.2 contents

background image

EN - English - I

nstruc

tions manual

16

6.2 Unpacking and contents

6.2.1 Unpacking

When the product is delivered, make sure that the

package is intact and that there are no signs that it

has been dropped or scratched.
If there are obvious signs of damage, contact the

supplier immediately.
Keep the packaging in case you need to send the

product for repairs.

6.2.2 Contents

Check the contents to make sure they correspond

with the list of materials as below:
• Explosion-proof housing
• Sunshield
• Document: Important safety instructions
• Silicon sheath
• Ties
• Spacers and screws for mounting the sunshield
• Plastic spacers and screws ¼" for camera and lens

mounting

• Spare O-rings
• Lubricant oil
• Extraction screws
• Wiper brush (version with wiper)
• Instructions manual

6.3 Safely disposing of packaging

material

The packaging material can all be recycled. The

installer technician will be responsible for separating

the material for disposal, and in any case for

compliance with the legislation in force where the

device is to be used.
When returning a faulty product we recommend

using the original packaging for shipping.

6.4 Preparatory work before

installation

Use appropriate tools for the installation.

The particular nature of the site where the

device is to be installed may mean special

tools are required for installation.

Choose an installation surface that is

strong enough to sustain the weight of

the device, also bearing in mind particular

environmental aspects, such as exposure to

strong winds.

Make sure that the device is firmly

anchored.

The device must be installed and

maintained only and exclusively by

qualified technical personnel.

For technical services, consult only and

exclusively authorized technicians.

Since the user is responsible for choosing

the surface to which the unit is to be

anchored, we do not supply the fixing

devices for attaching the unit firmly to

the particular surface. The installer is

responsible for choosing fixing devices

suitable for the specific purpose on hand. In

general use methods and materials capable

of supporting at least four times the weight

of the device.

It is possible to install the unit with several brackets.
We strongly recommend using only approved

brackets and accessories during installation.

This manual is related to the following products: