Holtkoetter 8502 User Manual

Halogen wall sconce no. 8502, Assembly instructions for

205 Hardman Avenue South, South Saint Paul, MN 55075

Voice: (800) 899-5444 • Fax: (888) 552-8661

www.holtkoetter.com

ASSEMBLY INSTRUCTIONS FOR

Major lamp parts manufactured in Germany by Holtkötter Leuchten GmbH.
Bulbs manufactured in Germany by Osram GmbH. Final assembly by Holtkötter in South Saint Paul, MN.

Holtkötter

and Holtkötter Leuchten

© Holtkötter

UL requires the following safety instructions:

Lighted lamp is HOT!

WARNING: Improper use of this fixture may increase the risk of
FIRE, ELECTRICAL SHOCK, EXPOSURE TO EXCESSIVE RADIATION or
INJURY TO PERSONS.

IN ORDER TO REDUCE THESE RISKS, PLEASE FOLLOW THESE SAFETY
INSTRUCTIONS:

1. Before replacing bulb, DISCONNECT power and allow bulb to cool.

2. DO NOT touch hot glass shield or operate lamp with a missing glass shield.

3. Keep lamp away from materials that may burn.

4. Do not remain in light if skin feels warm or look directly at a lighted bulb.

5. Use of the Osram bulb provided with this lamp prevents exposure to excessive UV Radiation.

Use of any other bulb may cause a risk of exposure to excessive UV Radiation and may also
cause a risk of overheating or may rupture the bulb.

Halogen Wall Sconce

No. 8502

Care Instructions

Use only a soft, dry cloth to clean. If necessary, a slightly damp, soft cloth can be used to spot
clean. Do not use common household cleaners on lamps or fixtures, as the lacquer on the
outside of the brass may be damaged as a result. Enjoy your new Holtkötter lamp.