Holtkoetter 6470LED User Manual
Bernie turbo series floor lamp no. 6470*led, Assembly instructions for
205 Hardman Avenue South, South Saint Paul, MN 55075
Voice: (800) 899-5444 • Fax: (888) 552-8661
e-mail: [email protected]
www.holtkoetter.com
ASSEMBLY INSTRUCTIONS FOR
Major lamp parts manufactured in Germany by Holtkötter Leuchten GmbH.
Bulbs manufactured in Germany by Osram GmbH. Final assembly by Holtkötter in South Saint Paul, MN.
Holtkötter
®
and Holtkötter Leuchten
®
are registered trademarks of Holtkötter. All Rights Reserved.
© Holtkötter
Bernie Turbo Series Floor Lamp
No. 6470*LED
Care Instructions
Use only a soft, dry cloth to clean. If necessary, a slightly damp, soft cloth can be used to
spot clean. Do not use common household cleaners on lamps or fixtures, as the lacquer
on the outside of the brass may be damaged as a result.
This low-voltage LED floor lamp comes fully assembled.
Technical Specifications
Light Engine:
Holtkötter PC Board LED 11-8
with 8x CREE XP-G LEDs
Optic / Reflector:
Holtkötter Aluminum Reflector
ø 134x100 with 60˚ x 5mm Optics
Light Output:
1120 Lumens equivalent to 80 W Halogen
Light Color:
2900 Kelvin
Control/LED Driver/Dimmer:
Holtkötter LED Dimmer with
full-range dimming of < 1% - 100%
Maximum Current/Voltage:
1000mA & 18V
System Power Consumption:
2 . . .12 Watt
Detail of LED Reflector