Holtkoetter 6354 - Manual

205 Hardman Avenue South, South Saint Paul, MN 55075
Voice: (800) 899-5444 • Fax: (888) 552-8661
e-mail: [email protected]
www.holtkoetter.com
ASSEMBLY INSTRUCTIONS FOR
Major lamp parts manufactured in Germany by Holtkötter Leuchten GmbH.
Bulbs not included. Final assembly by Holtkötter in South Saint Paul, MN. Holtkötter ® and Holtkötter Leuchten ® are registered trademarks of Holtkötter. All Rights Reserved.
© Holtkötter
Adjustable Floor Lamp
No. 6354
Your table lamp will come in two boxes, one for the shade and one for the base.
Assemble the Floor Lamp
1. Install the shade.
2. Unscrew the metal ring located on the socket of the lamp.
3. Place the shade over the center stem.
4. Screw the metal ring back into place and tighten handtight.
5. Install the bulb of your choice (not included).
Regular Shade: maximum Wattage: 100 Watts, Medium Edison Base.
Narrow Shade: maximum Wattage: 75 Watts, Medium Edison Base.
6. Plug the foot dimmer into the cord.
7. Your lamp is now operational.
Care Instructions
Use only a soft, dry cloth to clean. If necessary, a slightly damp, soft cloth can be
used to spot clean. Do not use common household cleaners on lamps or fixtures, as
the lacquer on the outside of the brass may be damaged as a result. Enjoy your new
Holtkötter lamp.