beautypg.com

Holtkoetter 2560LEDP1 User Manual

Assembly instructions for

background image

205 Hardman Avenue South, South Saint Paul, MN 55075

Voice: (800) 899-5444 • Fax: (888) 552-8661

e-mail: [email protected]

www.holtkoetter.com

ASSEMBLY INSTRUCTIONS FOR

Major lamp parts manufactured in Germany by Holtkötter Leuchten GmbH.
Final assembly by Holtkötter in South Saint Paul, MN.

Holtkötter

®

and Holtkötter Leuchten

®

are registered trademarks of Holtkötter. All Rights Reserved.

© Holtkötter

LED Floor Lamp

featuring “Dimm System *P1”

No. 2560 LED*P1

Congratulations, you have just purchased the leading-edge dimming technology from Holtkötter
International, Inc. We have specifically designed the “Dimm System Punkt 1” (Dimming System
Point 1 (P1)) to provide specialized features for ease and convenience of use.

Features of the “Dimm System Punkt 1”

Point Dimming - the lamp may be
turned on with a single click of the P1
dimmer.

Soft On - the lamp may be turned on
with a single click of the P1 dimmer. The
lamp will come on low and continue to
brighten to full brightness. This allows the
eye to adjust to a gradual increase in
light.

Soft / Delayed Off - turn the lamp off
with a single click of the P1 dimmer. The
lamp will dim to 60% brightness of the
original setting, remaining briefly at that
level to allow you to exit the room; then
the lamp gradually turns itself off. This
“soft” off provides a few moments of light
after turning the lamp off, rather than
immediate darkness as is the case with
other switches.

Dimming Cycle - to adjust the lamp to
the perfect light level for any situation,
press and hold the P1 dimmer. The dimmer will cycle through all dimming levels.
When the lamp achieves the light level of your choice, release the P1 dimmer.

Care Instructions

Use only a soft, dry cloth to clean. If necessary, a slightly damp, soft cloth can be used to spot
clean. Do not use common household cleaners on lamps or fixtures, as the lacquer on the
outside of the brass may be damaged as a result. Enjoy your new Holtkötter lamp.

Dimm System Point 1

Technical Specifications

Light Engine:

3x Holtkötter PC Boards each with 8x CREE XP-G LEDs

Optic / Reflector:

Holtkötter Aluminum Reflector with 60° x 5mm Optics

Light Output:

3360 Lumens equivalent to 240 W Halogen

Light Color:

2900 Kelvin

Control/LED Driver/Dimmer: Holtkötter Dimm-System P1 LED 1500 with full-range

dimming of <0.1% - 100%

Maximum Current/Voltage: 1500mA & 48V
System Power Consumption: 3 . . .36 Watts