Holtkoetter 2625LEDP1 User Manual

Assembly instructions for

205 Hardman Avenue South, South Saint Paul, MN 55075

Voice: (800) 899-5444 • Fax: (888) 552-8661

www.holtkoetter.com

ASSEMBLY INSTRUCTIONS FOR

Major lamp parts manufactured in Germany by Holtkötter Leuchten GmbH.
Final assembly by Holtkötter in South Saint Paul, MN.

Holtkötter

and Holtkötter Leuchten

© Holtkötter

Congratulations, you have just purchased the leading-
edge dimming technology from Holtkötter International,
Inc. Our “Dimm-System Punkt 1” (Dimming System Point
1 (*P1)) is specifically designed to provide specialized
features for ease and convenience of use.

Features of “Dimm System Punkt 1” include:

Point Dimming - the lamp may be
turned on with a single click of the P1
dimmer.

Soft On - the lamp will come on low and continue
to brighten to full brightness. This allows the eye to
adjust to a gradual increase in light.

Soft / Delayed Off - turn the lamp off with a single
click of the P1 dimmer. The lamp will dim to 60%
brightness of the original setting, remaining briefly
at that level to allow you to exit the room; then
the lamp gradually turns itself off. This “soft” off
provides a few moments of light after turning the
lamp off, rather than immediate darkness as is the
case with other switches.

Dimming Cycle - to adjust the lamp to the perfect
light level for any situation, press and hold the P1
dimmer. The dimmer will cycle through all dimming
levels. When the lamp achieves the light level of your
choice, release the P1 dimmer.

Raumfluter 2625 LED floor lamp comes fully assembled.

Our breathtaking Ultimate Lighting Machine, this time as a single torchiere with our
proprietary LED reflector and the Holtkötter Dimm-System Punkt 1 (*P1).

Technical Specifications

Light Engine:

Holtkötter PC Board LED 11-24 with 24x CREE XP-G LEDs

Optic / Reflector:

Holtkötter Aluminum Reflector with 60° x 5mm Optics

Light Output:

3360 Lumens equivalent to 240 W Halogen

Light Color:

2900 Kelvin

Control/LED Driver/Dimmer: Holtkötter Dimm-System P1 LED 1500 with full

range dimming of <0.1% - 100%

Maximum Current/Voltage: 1500mA & 48V
System Power Consumption: 3 . . .36 Watts

Care Instructions

Use only a soft, dry cloth to clean. If necessary, a slightly damp, soft cloth can be used to spot
clean. Do not use common household cleaners on lamps or fixtures, as the lacquer on the
outside of the brass may be damaged as a result.

2625/24*LED

LED Raumfluter with *P1

No. 2625*LED