Playback – Kenwood TK-2185E User Manual
Page 45
■
Playback
To play back a recorded conversation, memo, or message:
1 Press the key programmed as Playback to enter
Playback mode.
• If the last action on your transceiver was to auto record
your conversation, “STORE?” will appear on the display,
otherwise a recording channel with the time of the
recording will appear.
• To store the conversation record in the next available
recording channel, press the
Side 2 key. To clear the
conversation, press the
A or # key. To skip to the stored
recording channels, press the
S or
key. To skip back
seconds, press the
press the
C> key.
2 Rotate the selector to select the channel which you want
to play back.
• “RM” represents automated reply messages.
• “AR” represents auto-recorded conversations.
• “VM” represents voice memos.
3 The transceiver will announce the channel, then the
recording will automatically play back.
• When the entire recording has been played,
“END OF MSG” is displayed.
• To delete the selected recording, press the
A or # key. To
clear all the recorded data, press and hold the
A or # key.
A confirmation message will appear on the display; press
the
S or
key to delete the recording(s) or the
A or # key
to cancel.
v
oice
g
uide
When pressing a transceiver key, an audio voice will announce
the key function. If programmed by your dealer, an audio voice
will also announce the selected call address, when changing
call addresses.