Kenwood TK-2185E - Manual (Page 28)

8
v
iewing the
S
tAck
1 Press the Status/ Stack key twice to enter the stack.
• If there is no data in the stack, “————————————”
appears on the main display and “–00” appears on the
sub-display.
2 Rotate the selector to view the stack entries.
• “NEW” momentarily appears on the sub-display if the message
has not yet been viewed.
• In the sub-display, “S” represents a status stack entry, “V”
represents a voice stack entry, and “D” represents a data stack
entry.
3 Press the and C> keys to scroll through the selected
entry, to view the entire entry. Press the A key to toggle
between the time/date of the received call and the caller ID.
4 To erase an entry, select the desired entry and press the
Clear key.
• “DELETE?” appears on the display. Press the S or key to
confirm the deletion. Press the A or # key to cancel.
5 To erase all entries, select press and hold the Clear key.
• “DELETE?” appears on the main display and “ALL” appears on
the sub-display. Press the S or key to confirm the deletion.
Press the A or # key to cancel.
c
All
d
iverting
■
Diverting Your Own Calls
1 Enter control code 41 to divert your calls to a different
transceiver.
2 Press the key, then enter the ID number of the unit to
where you want your calls diverted.
3 Press the PTT switch, the Call key, or the # key to set
up the call diversion.
• “CALLING” appears on the display.