Kenwood TK-2185E - Manual (Page 18)

8
BASIC OPERATIONS
S
witching
p
ower
on/ oFF
Turn the Power switch/ Volume control clockwise to switch the
transceiver ON.
• A beep sounds and the display momentarily lights up.
• If the Transceiver Password function is programmed, “PASSWORD”
appears on the display. If a key has been programmed as
Transceiver Password, you must press this key first, before
“PASSWORD” appears on the display. You must enter the
password to unlock the transceiver. Refer to “Transceiver
Password”, below.
Turn the Power switch/ Volume control counterclockwise to
switch the transceiver OFF.
■
Transceiver Password
To enter the transceiver password:
1 Press the DTMF keys corresponding to the password
digits.
• Alternatively, you can enter the password by rotating the
selector to select a digit, followed by pressing the C> key
to accept the entered digit and move to the next digit.
• Press the A or # key to delete an incorrect character.
Press and hold the A or # key to delete all entered
characters.
2 Press the S or key to confirm the password.
• If you enter an incorrect password, an error tone sounds
and the transceiver remains locked.
A
djuSting the
v
olume
Rotate the Power switch/ Volume control to adjust the volume.
Clockwise increases the volume and counter-clockwise
decreases it.