Kenwood TK-2185E - Manual (Page 25)

■
Receiving a Voice Call
1 When a call is received, the caller’s unit number
appears on the main display.
• If you have the caller’s address set up in your transceiver,
the call address is displayed instead of the unit number.
• Depending on the type of call being received, a code will
appear on the sub-display:
CAL: An individual call is being received.
GRP: A group conference call is being received.
BCC: A group broadcast call is being received.
• Special calls are denoted as follows:
I-FLEET: A call from a different fleet (Inter-Fleet).
I-PREFIX: A call from a different prefix (Inter-Prefix).
PABX: A call from a PABX telephone system.
PSTN: A call from a PSTN telephone system.
2 Press the PTT switch to respond to the call.
• The remaining call time appears on the display.
3 When the call ends, the display returns to the call
address that was previously displayed. However, if
you end the call by pressing the Clear key, “END”
momentarily appears on the display before returning to
the call address.