Kenwood TK-2185E - Manual (Page 23)

p
rogrAmmABle
F
unctionS
The Auxiliary, Side 1, Side 2, S, A, , and C> keys
can be programmed with the functions listed below. Please
contact your dealer for further details on these functions.
• Auto Reply Message
• AUX
• Call
• Call Address Down
2
• Call Address Up 2
• Clear
• Clock
• Conventional
• Dialing
• Dialing Mode
• Emergency 4
• GPS Position Display
• Home Address
• Key Lock
• Lamp
• Network Select
• None
• Playback
• Redial
• Scrambler
• Send the GPS Data
• Site Lock
• Status/Stack
6
• Sub LCD Display
• Transceiver Password
• Vibrator
“Auto Reply Message” and “Playback” can be programmed only when
the optional VGS- board has been installed.
2 “Call Address Down” and “Call Address Up” can be programmed only
on the optional microphone PF, and PF2 keys.
“Dialing Mode” can be selected when Keypad Operation is set to
Programmable.
4 “Emergency” can be programmed only on the Auxiliary (orange) key.
“GPS Position Display” can be assigned only if one of the COM ports
is configured for GPS.
6 “Status/ Stack” can be programmed only on the S key.
“Vibrator” can be set up only when it is configured for Universal
Connector Pin No. .