Kenwood TK-2185E - Manual (Page 29)

9
• When the call divert is set, “COMPLETE” momentarily
appears on the display. Additionally, the icon appears
on the display and flashes.
4 To end the call diversion, enter control code #41, then
press the PTT switch, the Call key, or the # key.
• “CALLING” appears on the display.
• When the call divert is cleared, “COMPLETE” momentarily
appears on the display.
■
Diverting Third Party Calls
1 Enter control code 44 to divert third party calls.
2 Press the key, then enter the ID number of the unit
from which you want calls diverted.
3 Press the key, then enter the ID number of the unit to
where you want the calls diverted.
4 Press the PTT switch, the Call key, or the # key to set
up the call diversion.
• “CALLING” appears on the display.
• When the call divert is set, “COMPLETE” momentarily
appears on the display.
5 To end the call diversion, enter control code #44
followed by the key and the ID number of the unit
from which calls are being diverted, then press the PTT
switch, the Call key, or the # key.
• “CALLING” appears on the display.
• When the call divert is cleared, “COMPLETE” momentarily
appears on the display.
d
iAling
m
ode
Press the key programmed as Dialing Mode to enter a dialing
number using the keypad.
Note: You can select Dialing Mode when Keypad Operation is set
to Programmable.