Kenwood TK-2185E - Manual (Page 27)

3 Press the key to end your message.
4 Enter the ID number of the unit you want to send the
message to.
5 Press the PTT switch, the Call key, or the # key to
transmit.
■
Receiving a Data Call
1 When a call is received, the icon appears on the
display and flashes.
• The icon remains on the display when there is data in
the stack.
2 To view the message, refer to “V
iewing the
S
tack
”, on
page8.
c
All
d
iSplAyS
The following messages may appear on the display under
certain circumstances:
•
ENGAGED: The called party is in another call.
• HOLDING: The transceiver is confirming the call made by
the base station.
• INVALID: You entered an invalid call address.
• NU: The called party could not be reached (Number
Unobtainable).
• NO REPLY: The called party has been called, but they did
not respond to the call.
• PARTY BUSY: The called party is temporarily prohibited
from making calls.
• QUEUED: All communication channels are currently in use;
your call will be connected when a channel becomes free.