Kenwood TK-2185E - Manual (Page 40)

0
B
Acklight
To turn the transceiver display backlight on, press the key
Lamp.
• Once activated, the backlight remains on for seconds.
• Pressing any key other than the
PTT switch, the Power switch/
Volume control, and the Lamp key while the backlight is on will
reset the backlight timer, allowing it to remain lit for an additional
seconds.
To turn the transceiver backlight off immediately, press the
Lamp key while the backlight is on.
k
ey
l
ock
This function is used to help prevent any accidental operation
of the transceiver.
To lock the transceiver keys, press and hold the key
programmed as Key Lock for approximately second.
• "LOCKED" momentarily appears on the display.
• In Conventional Mode, you can continue to use the
Key Lock,
Lamp, and Squelch Off keys.
• In Trunking Mode, you can continue to use the Call, Clear,
Emergency, Key Lock, and Lamp keys.
To unlock the keys, press and hold the Key Lock key again.