Kenwood K-323-BK - Manual (Page 36)

K-323
36
System Setup
Setting the display saver
(DISP. SAVER)
When this unit has not been controlled for a certain
period of time, the display scrolls to prevent burns
and brightness irregularities from being produced
on the display panel.
1
Enter the setup mode.
Press [MODE].
2
Select "DISP. SAVER".
Press [ G]/[H] to select,
then press [ENTER].
3
Set Display Saver.
Press [ G]/[H] to select,
then press [ENTER].
D. SAVER ON
D. SAVER OFF
Display Saver is OFF.
Display Saver is ON.
When the setting completes, "COMPLETE" is
displayed and the unit exits the setup mode
automatically.
When the input source is CD/USB, Display Saver is
activated when the unit has not been controlled for 10
minutes after the end of the last playback. With other
inputs, Display Saver is activated when the unit has
not been controlled for 10 minutes after a button is
pressed. •
Setting the brightness of the
display (DIMMER SET)
The brightness of the display can be set as desired.
1
Enter the setup mode.
Press [MODE].
2
Select "DIMMER SET".
Press [ G]/[H] to select,
then press [ENTER].
3
Set the display brightness.
Press [ G]/[H] to select,
then press [ENTER].
DIMMER ON
DIMMER OFF
Dimmer is OFF.
Dimmer is ON.
When the setting completes, "COMPLETE" is
displayed and the unit exits the setup mode
automatically.
This setting is also available using [DIMMER] on the
remote control unit. •