Kenwood K-323-BK - Manual (Page 10)

K-323
10
Connecting Associated Products (Commercially Available)
Before connecting associated system products, be sure to read their instruction manuals.
Connect every connection cord fi rmly. Incomplete insertion may cause loss of audio output or generation of noise.
•
•
USB (USB device connector)
Connect a USB fl ash memory or a digital audio
player with USB mass storage class compatibility
to the [USB] terminal on the rear of this unit.
With certain models, it takes a certain period before
the connection is recognized.
Certain models display the USB connection mode
selection menu. In this case, select the "Storage"
mode.
The USB device cannot be recognized via a USB
hub, etc.
•
•
•
USB fl ash memory
Digital audio player,
etc.
D.AUDIO IN (D.AUDIO input connector)
Connect a digital audio player or an iPod dock
(PAD-iP7) to the [D.AUDIO IN] terminal on the rear
of this unit.
When a Kenwood digital audio player with digital
audio link compatibility is connected using the
dedicated cable (separately available), the player
can be controlled from this system or its remote
control unit. The iPod can be controlled when it is
connected using the PAD-iP7 dedicated adapter
(separately available).
A digital audio player other than above can
be connected using a stereo miniplug cable
(commercially available).
When not using the iPod, unplug the cable from the
main unit.
•
•
•
Y Cb Cr
AUDIO/
VIDEO
DC IN
COMPONENT VIDEO
D.AUDIO
Kenwood
digital audio player
iPod
separately available
PAD-iP7
(separately available)
Stereo miniplug cord
(commercially available)
Digital audio player,
etc.
Connections
Caution for connection
Set the main unit in the standby mode before connecting any associated product to
it and do not set the power button to ON until all connections are completed. Before
unplugging a connected cord or cable, be sure to set the power button to OFF and
unplug the power cord from the power outlet in advance.