Kenwood K-323-BK - Manual (Page 32)

K-323
32
System Setup
Adjusting the Time
(TIME ADJUST)
The day of the week and the time of the day of the
system can be set.
1
Enter the setup mode.
Press [MODE].
2
Select "TIME ADJUST".
Press [ G]/[H] to select,
then press [ENTER].
3
Set the day of the week, hour and
minute.
Adjust the day of the week, the hour,
then the minute.
Press [ G]/[H] to select,
then press [ENTER].
4
Enter the selection.
Press [ENTER].
When the setting completes, "COMPLETE" is
displayed and the unit exits the setup mode
automatically.
To display time of day when the system is OFF
(standby mode):
Press [ F]/[STOPF]
The time of the day is displayed for 5 seconds.
If the power cord is unplugged then plugged in or
after a power failure, adjust the time of the day again.
The clock operation involves a certain error. It
is recommended to adjust the time of the day
periodically.
■
•
•