Kenwood K-323-BK - Manual (Page 26)

K-323
26
Listening to Radio Broadcasting
A radio station in the FM/AM band can be selected
and listened to.
Listening to Radio Broadcasting
1
Select the "FM" or "AM" band.
Press [TUNER/BAND].
Each press switches the tuning band alternately.
FM
lit
AM
lit AM band
FM band
Press [INPUT SELECTOR].
Display when the FM input is selected.
2
Select a radio station.
Selecting a station preset in the
memory (Preset call)
Select a radio station from the preset memory
(No. 01 to 40).
Press [ G]/[H].
When preset No. 27 is selected.
Holding the button depressed switches the preset
numbers at intervals of about 0.5 second.
The preset number can also be entered directly.
Press the [Numeric] button(s) to select.
To select preset No. 27 R
Press [+10] twice and [7] once.
•
•
Selecting a station that is not preset in
memory (Auto tuning/Manual tuning)
1Select the tuning mode.
Press [ G]/[H].
Each press switches the tuning mode alternately.
AUTO
not lit
Manual tuning
When the radio wave
condition is poor, vary
the tuning frequency
manually.
AUTO
lit
Auto tuning
Auto reception is possible
when the radio wave
condition is favorable.
When auto tuning is selected.
2Select a station.
Press [ G]/[H].
Auto Tuning:
Each press tunes into the next receivable station
automatically.
Manual Tuning:
Each press varies the frequency by 1 step. Hold
the button continuously varies tuned frequencies
at a high speed.
No audio is output during either auto or manual
tuning.
Auto Tuning receives stations in stereo audio but
Manual Tuning receives them in monaural audio.
"TUNED" lights up when a station is tuned. "ST." lights
up when stereo broadcasting is tuned.
■
■
•
•