Kenwood K-323-BK - Manual (Page 12)

1
2
3
4
5
6
7
9 a 8 0 b c e f g d h i
K-323
12
1
(Power)
● Press to switch the power ON/OFF (standby).
2
CD EJECT 0
● Eject the disc.
3 INPUT SELECTOR
● Press to switch the input sources in order of [FM]
R [AM] R [D.AUDIO] R [AUX] R [DIGITAL IN].
4
CD E
● Press to play the CD or let it pause.
5 USB E
● Press to play the USB device or let it pause.
6 STOP
7
● Press to stop playback of CD/USB/D.AUDIO.
● During radio listening, pressing the button switches
the tuning mode between auto and manual.
7 VOLUMEA /
B (Volume control)
● Press to control the volume level. Pressing A
increases the volume level and pressing B
decreases it.
8 STANDBY/TIMER indicator
● Red: Normal standby mode.
● Orange: Timer standby mode
9 Remote control sensor
0 Disc slot
a Display
b
AUX IN (Auxiliary input connector)
c PHONES (Headphones connector)
● Connect headphones equipped with a stereo mini-plug.
d REC OUT (Recording output connector)
e ANTENNA (FM/AM aerial terminals)
● Connect the provided FM/AM aerials.
f D.AUDIO IN (D.AUDIO input connector)
g USB (USB device connector)
h DIGITAL IN (Digital audio input connector)
i
AC IN (Power input connector)
● Connect the unit to a mains outlet using the
provided power cord.
Standby mode
When the [STANDBY/TIMER] indicator is lit, a small
amount of power is supplied to the system to operate
the microcomputer. This status is referred to as the
standby mode. In this state, the system can be switched
OFF from the remote control unit.
Component names and functions
Main unit