Kenwood DNN991HD - Manual (Page 35)

34
Return to the Top page
Network setup
Wi-Fi Hotspot Setup
If there is no Wi-Fi access point, this unit
becomes a Wi-Fi access point. You can
connect your smartphone and your tablet
PC, and enjoy Kenwood Wireless Link
function. (P.90)
Preparation
• When Wi-Fi Hotspot is in use you can not
connect to the Internet via Wi-Fi. To connect to
the Internet, 4G/3G Dongle (sold separately) is
necessary.
(P.35)
• Set to OFF the Wi-Fi in Wi-Fi Setup (P.32) .
1
Press the button to display
the Home screen.
Note
• To display the Network contents panel, Press the
button again.
2
Press the
3
Touch [Setting].
4
Touch [Portable hotspot].
5
Touch [Configure Wi-Fi hotspot].
6
Enter the SSID code. Select the security.
Enter the password.
When you check Show password, the
password that you set is displayed.
7
Touch [Save].
8
Touch [Portable Wi-Fi hotspot].
This unit works as the Wi-Fi access point.