Voice control (dnn991hd), Voice control, Oice control (dnn991hd) – Kenwood DNN991HD User Manual
Page 129
128
The unit is equipped with Advanced Voice
Recognition function which allows you to
operate it with your voice. The supported
languages are US English, UK English, French,
German, Dutch, Italian, and Spanish. For
information on the voice commands, refer to
NOTE
• ASR on the Language Setting screen should be
set to “Enabled”. See
.
Voice Control
1
Press the Push-To-Talk switch to enter
the Voice control mode.
The buttons enclosed in a green square
support the voice control.
2
Speak the command. (Ex: Speak “HD
RADIO”.)
The screen has changed to the HD Radio
Control screen.
You will hear a beep again.
3
Repeat the same procedure as step 2.
For information on the voice commands,
refer to
.
4
Press the Push-To-Talk switch to end
the voice control mode.
Ñ
Displaying Voice Commands
To display the list of operable voice
commands.
1
Press and hold the Push-To-Talk switch.
The list of operable voice commands
appears. Pronounce a command.
NOTE
• To cancel the commands list display, press Push-
To-Talk switch or touch the screen.
ñ
V
oice Control (DNN991HD)